• 1
  • 2
  • 3
  • 4
  • 5

User Guides

Quick Reference Guide For Allegro™ Alarm Panel

Source: Allegro User Guide 466-1822 Rev.E

How to… Command
Check the system status Status (once)
Disarm Disarm + Code
Arm doors and windows Arm + Code
Arm doors and windows, no delay Arm + Code + No Display
Arm motions, doors and windows Arm (twice) + Code
Arm motions, doors and windows, no delay Arm (twice) + Code + No Display
Arm system silently Silent + Arm + Code
Turn ON/OFF chime (unarmed system only) Chime (once)
Identify open sensors, trouble conditions and alarms in memory Status (once)
Bypass Bypass + Primary Code
Quick Exit (when system is armed) Quick Exit (once) 2 minutes to expire
Police Panic Police Panic Press & hold both keys for 4 seconds.
Fire Panic Fire Panic Press & hold both keys for 4 seconds.

IMPORTANT: After you activate Police Panic or Fire Panic, your panel will communicate to SecurTek central monitoring station. Do not use the telephone after Panic activation, SecurTek will call you right away to confirm the emergency situation.

It is recommended by the manufacturer that you test system weekly.

For more detailed instructions refer to Allegro User Guide provided to you.

Top

Quick Reference Guide For DSC_PC1616/PC1632/PC1864 Alarm Panel

Source: PC1616/PC1632/PC1864 v4.2 User Manual

It is recommended by the manufacturer that you test system weekly.

To Arm the Entire System – Both Interior and Perimeter
  • Close all the windows and doors. The green Ready Ready light indicator should be ON.
  • Press and hold the AWAY key for 2 seconds. The keypad will beep rapidly 5 times and the red Armed Armed light will turn ON. ON
  • You will have to exit before the Exit Delay time expires.
  • To cancel the arming sequence, enter your access code.
To Arm Perimeter of Building and Still Move Freely Inside
  • Press the Stay Stay key for 3 seconds.
To Bypass Zones
  • Press Asterisk 1 while disarmed.
  • Scroll using > key to view zones and press Asterisk to select.
  • To exit the Bypass function press #.
To Unbypass Zones
  • Press Asterisk 1 while disarmed.
  • Scroll using > key to view zones. Search for zones with B mark and press Asterisk to unbypass.
  • To exit the Bypass function press #.
To Disarm the System
  • Upon entering through the armed door, the keypad will emit a steady warning tone.
  • Enter your 4-digit Master Code or User Code. The Armed Lock light will turn OFF.
To Silence Alarm
  • Enter your 4-digit Master Code or User Code.
Door Chime (Entry/Exit Beeps)
  • To turn the door chime function ON/OFF, press and hold the Chime Chime key for 2 seconds.
Alarm Memory
  • The alarm indicator Indicator lights up when the sensor(s) generated an alarm or there is system trouble.
  • To view the trouble, press Asterisk 2.
  • To view which sensor(s) generated the alarm, press Asterisk 3.
EMERGENCY KEYS

Press the Fire Fire , Auxiliary Auxiliary , or Panic Panic key for at least 4 seconds to generate an emergency alarm. This alarm will be transmitted to the SecurTek monitoring station. After pressing the emergency buttons, DO NOT use the telephone line because SecurTek will call you right away to confirm the emergency situation.

Top

Quick Reference Guide For DSC PowerSeries™ 9047 Alarm Panel

Source: PowerSeries™ 9047 User Manual

To Arm the Entire System – Both Interior and Perimeter
  • Close all the windows and doors. The green Ready Ready light indicator should be ON.
  • Press and hold the Away key for 2 seconds. The keypad will beep rapidly 5 times and the red Armed Armed light will turn ON.
  • You will have to exit before the Exit Delay time expires.
  • To cancel the arming sequence, enter your access code.
To Arm Perimeter of Building and Still Move Freely Inside
  • Press the Stay key for 3 seconds.
To Bypass Zones
  • Press Asterisk 1 while disarmed.
  • Scroll using > key to view zones and press Asterisk to select.
  • To exit the Bypass function press #.
Unbypassing Zones
  • Press Asterisk 1 while disarmed.
  • Scroll using > key to view zones. Search for zones with B mark and press Asterisk to unbypass.
  • To exit the Bypass function press #.
To Disarm the System
  • Upon entering through the armed door, the keypad will emit a steady warning tone.
  • Enter your 4-digit Master Code or User Code. The Armed Armed light will turn OFF.
To Silence Alarm
  • Enter your 4-digit Master Code or User Code.
Door Chime (Entry/Exit Beeps)
  • To turn the door chime function ON/OFF, press and hold the Chime key for 2 seconds.
Alarm Memory
  • The alarm indicator Indicator lights up when the sensor(s) generated an alarm or there is system trouble.
  • To view the trouble, press Asterisk 2.
  • To view which sensor(s) generated the alarm, press Asterisk 3.
EMERGENCY KEYS

Press the Fire Fire , Auxiliary Auxiliary , or Panic Panic key for at least 4 seconds to generate an emergency alarm. This alarm will be transmitted to the SecurTek monitoring station. After pressing the emergency buttons, do not use the telephone line because SecuTek will call you back right away.

For more detailed instructions, refer to the DSC PowerSeries™ 9047 User Manual.

Top

Quick Reference Guide For DSC Alexor™

Source: Alexor User Manual

THE MANUFACTURER RECOMMENDS THAT YOU TEST SYSTEM WEEKLY.

Arming and Disarming the System
To Arm Perimeter of Building and Still Move Freely Inside
(Stay Arming will arm the perimeter and bypass the interior protection.)
  • Close all the windows and doors. The green Ready Ready light indicator should be ON.
  • Press and hold the Stay button for 2 seconds until it beeps. Do not leave the premises.
  • After the exit delay is completed, the Armed Armed indicator will be ON and shows Stay Mode in the display.
  • To cancel the arming sequence, enter your access code.
To Arm the Entire System – Both Interior and Perimeter
(Away Arming will arm both the perimeter and the interior protections.)
  • Close all sensors. The green Ready Ready indicator should be ON.
  • To arm, press the Away button on the keypad (or if available, use your key fob or your prox tag).
  • During the setting state, the Armed Armed and Ready Ready indicators will turn ON and the keypad will sound one beep per second becoming more frequent in the last 10 seconds of the delay time. Exit the perimeter before the delay time expires.
  • When the exit delay is completed, the Ready button will turn off, the Armed Armed. indicator will remain on, the keypad will stop beeping and the display shows Away Mode.
  • To cancel the arming sequence, enter your access code.
To Disarm the System
  • Upon entering through the armed door, the keypad will emit a steady warning tone. Enter your Code to disarm the system.
  • The Armed Armed light will turn OFF.
Disarming Error
  • If disarming error occurred (ie., invalid code or tag used), press # and try again.
Door Chime (Entry/Exit Beeps)
  • To turn the door chime function ON/OFF, press and hold the Chime key for 2 seconds.
Alarm Memory
  • When the alarm occurs, the Alarm Memory message will be displayed. To view which sensor(s) generated the alarm, press Asterisk 3.
  • Press # to exit the alarm memory view.

*** To clear trouble beeps, press * 2 #

EMERGENCY KEYS

Press the Fire Fire, Auxiliary Auxiliary , or Panic Panic key for at least 4 seconds to generate an emergency alarm. This alarm will be transmitted to the SecurTek monitoring station. After pressing the emergency buttons, do not use the telephone line because SecuTek will call you back right away.

For more detailed instructions, refer to the ALEXOR User Manual. Visit www.dsc.com.

Top

Quick Reference Guide For SIMON 3 Operation

Source: Simon® Security System User Guide. 466-1871 rev. J

It is recommended by the manufacturer that you test system weekly.

Arming the System WITH Doors and Windows Closed
  • Close all doors and windows.
  • Press Arm Doors & Windows button.
Arming the System WITH Doors and Windows Open
  • Close all doors and windows except the ones you wish to remain open.
  • Press Arm Doors & Windows button twice.
Arming the System with NO ENTRY DELAY
  • Close all doors and windows.
  • Press Arm Doors & Windows button twice.
Arm Motion Sensors
  • Press Arm Motion Sensors button once.
Disarming the System
  • Enter your access code using the numeric buttons.
Turn Chime Doors ON/OFF
  • System must be disarmed. Press Chime Doors button. Panel will announce Chime on. Chime Doors button will be lit.
  • To turn off chime, press Chime Doors button. Panel will announce Chime off. Chime Doors button no longer lit.
Checking System Status
  • Press the System Status button, the panel voice prompt will identify the system status.
Bypassing Sensors
  • Press the Bypass button until you reach the sensor to be bypassed (sensor must currently be unbypassed).
  • Enter Master Code.
Unbypassing Sensors
  • Press the Bypass button until you reach the sensor to be unbypassed (sensor must currently be bypassed).
  • Enter Master Code.
EMERGENCY:

Press FIRE, POLICE, or AUX for at least 4 seconds to call SecurTek central monitoring station for emergency. Do not use the telephone after pressing the emergency button, SecurTek will call you right away to confirm the emergency situation.

Top

Quick Reference Guide For SIMON XT Operation

Source: Simon XT User Manual

Arming the System WITH Doors and Windows Closed
  • Press the DOORS+WINDOWS button once.
Arming the System WITH Doors and Windows Open
  • Close all doors and windows except the ones you wish to remain open.
  • Press DOORS+WINDOWS button twice.
Arming the System with NO ENTRY DELAY
  • Close all doors and windows.
  • Press DOORS+WINDOWS button twice.
Arm Motion Sensors
  • Press the MOTIONS button once.
Disarming the System
  • Enter your access code using the numeric buttons.
Toggle Chime ON/OFF
  • Scroll to Chime or Special Chime, press Enter key.
  • Toggle On/Off, press Enter key.
Checking System Status
  • Press the Status button, the panel voice prompt will identify the recent system status.
Bypassing a Sensor
  • Press the Bypass button, enter the user code.
  • Scroll for the sensor to be bypassed, press Bypass.
Unbypassing a Sensor
  • Press the Bypass button, enter the user code.
  • Scroll for the sensor to be unbypassed, press Bypass.
EMERGENCY

Press FIRE Fire, POLICE Police, or AUX Auxiliary for at least 4 seconds to call SecurTek central monitoring station for emergency. Do not use the telephone after pressing the emergency button, SecurTek will call you right away to confirm the emergency situation.

 

For more information please contact Prince Albert Alarm Systems at 1-306-922-7233 or 1-800-201-1118. You may also click here to contact us by e-mail.

Top